Shop – Afriwatt Engineering

SmartSolar MPPT 150/70

Rhyl Kiio — Sun, 09 Apr 2023 23:01:37 +0000

MPPT: Ultra Fast Maximum Power Point Tracking

The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model.

The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.

Control Your Charger Remotely

The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.

Daisy Chain Additional Units

The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units.

When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.

Remote Monitoring and Control

If the GX device is connected to the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).

For remote installations – even when there is no internet connection nearby – you may be able to monitor your MPPT by connecting the GlobalLink 520.

SmartSolar Control Display

The VE.Can the SmartSolar charger is also equipped with a VE. Direct port like our other MPPT solar chargers. This port can be for single-unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display/control provides live data, set-up and management, straight from the face of the device.

120A MPPT Solar Charge Controller Regulator With LCD Display

Rhyl Kiio — Sun, 09 Apr 2023 22:48:56 +0000

FEATURES

• Intelligent Maximum Power Point Tracking technology increases eﬃciency 25%~30%

• Compatible for PV systems in 12V, 24V or 48V

• Three-stage charging optimizes battery performance (Two-stage charging in lithium battery mode)

• Maximum charging current up to 30A / 45A / 60A / 80A / 100A / 120A

• Maximum eﬃciency up to 98%

• Automatic battery voltage detection(Lithium battery voltage needs to be set manually)

• Supports lithium battery and various lead-acid batteries, AGM and gel battery

• Integrated intelligent slot compatible with MODBUS communication

Introduction:

Brief introduction A MPPT( Maximum Power Point Tracking ), or maximum power point tracker is an electronic DC-to-DC converter that optimizes the match between the solar array (PV panels), and the battery bank or utility grid. To put it simply, they convert a higher voltage DC output from solar panels (and a few wind generators) down to the lower voltage needed to charge batteries.

Compared to conventional PWM controller, MPPT technology increases the charge efficiency up to 20% and potentially decrease the power of the solar array needed

Data Sheet

Model

SCCM12048

Maximum Solar Input Voltage

195V

Nominal System Voltage

12,24,48VDC(Auto detection)

Maximum Battery Current

45A

DC Array MPPT Voltage Range

12VDC/24VDC/48VDC

PV Array MPPT Volage Range

15-190VDC/30-190VDC-60-190VDC

Maximum Input Power

12Volt-1655Watts

24Volt-3300Watts

48Volt-6600Watts

Charging Algorithm

3-Step

Charging stages

Bulk, Absorption, Float Bulk, Absorption, Float

Temperature compensation coefficient

-5mV/℃/cell(25℃ref.) -5mV/℃/cell(25℃ref.)

Temperature compensation range

0℃ to +50℃ 0℃ to +50℃

Temperature-compensated set points

Absorption, Float Absorption, Float

Charging Set points

Absorption Stage Absorption Stage Float Stage

Flooded Battery

14.6V/29.2V/58.4V 14.6V/29.2V/58.4V 13.5V/27V/54V

ARG/Gel Battery（Default)

14.1V/28.2V/56.4V 14.1V/28.2V/56.4V 13.5V/27V/54V

Overcharge voltage

15V/30V/60V 15V/30V/60V

Overcharge restart voltage

14.5V/29V/58V 14.5V/29V/58V

Battery discharge voltage

8.5V/17V/34V 8.5V/17V/34V

Battery over-discharge voltage

9V/18V/36V 9V/18V/36V

Product size(H*W*D,mm)

333*215*120mm

Product weight(Kg)

7.0kg

Ambient Temperature Range

0℃ to +55℃

Storage Temperature

-40℃ to 75℃

Humidity

0%-90%RH(No condensing)

Enclosure

IP31(indoor&vented)

Victron Smart Solar MPPT 250/100-TR

Rhyl Kiio — Sun, 09 Apr 2023 22:36:27 +0000

MPPT: Ultra Fast Maximum Power Point Tracking

By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Remote Monitoring and Control

Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or another device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by Bluetooth-pairing with a LoRaWAN(long-range wide area network) device, available optionally.

Optional SmartSolar Control Display

By adding the SmartSolar Control Display you will be able to check the status of your Charger and battery storage at a glance. Simply plug it into the face of your MPPT charger to provide you with real-time monitoring and set-up capabilities.

PWM Solar Charge controller

Rhyl Kiio — Sun, 09 Apr 2023 22:25:06 +0000

Description

This is an intelligent solar charge and discharge controller. Fixed LCD display with a very friendly interface, various control parameters can be flexibly set, and fully meet your home Photovoltaic system (including a home lighting system) requirements. Widely used for solar green light, solar light billboards, solar insecticidal lights, solar power generation systems, ship solar power systems, solar power generation systems, and more.

Common Charge Control Features& Function

TK Series
Humanization LCD display
PWM 3-stage charging
Optional load working mode
Overall effective protection function

SolarPex MPPT Charge controllers

Rhyl Kiio — Fri, 07 Apr 2023 23:57:41 +0000

This solar charge controller has multiple protection against overcharge, over-discharge, overload, short circuit, reverse polarity, overheating and battery under voltage. Has an LCD display making it clear to see operating data and working condition, Real-time energy statistics function with Multiple load control modes, and Mppt solar charge controller Display the daily power generation curve and current curve.

Victron SmartSolar MPPT 150/100

Rhyl Kiio — Fri, 07 Apr 2023 23:28:07 +0000

A solar charger gathers energy from your solar panels and then stores it in your batteries. Because the Victron SmartSolar MPPT Charge Controller uses the latest, fastest technology. SmartSolar MPPT maximises this energy harvest, driving it intelligently to achieve full charge in the shortest possible time. The Victron SmartSolar MPPT 150/100 maintains battery health, extending its life.

Afriwatt recommend customers use the Victron SmartSolar MPPT 150/100 with solar panels up to 1450w (12v), 2900w (24v), 5800w (48v)

Please click below for more information on Victron SmartSolar MPPT. (pdf)

Victron SmartSolar charge controller MPPT 150-85 &150-100

Features of the Victron SmartSolar MPPT 150/100:

Feature highlights
• Bluetooth Smart built-in: enables set-up and monitoring with a smartphone or other Bluetooth
enabled device
• Ultra-fast Maximum Power Point Tracking (MPPT)
• Advanced Maximum Power Point Detection in case of partial shading conditions
• Load output on the small models
• Battery Life: intelligent battery management by load shedding
• Automatic battery voltage recognition
• Flexible charge algorithm
• Over-temperature protection and power de-rating when the temperature is high.

Flexible charge algorithm Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).

Specification:

Type: MPPT 150/100
Nominal Battery Voltages (Vdc): 12/24/48V
Max. Battery Current (A): 100
Peak Efficiency: 98%
Max. PV Open Circuit Voltage (V): 150 absolute minimum coldest conditions, 145 start-ups and operating maximum.
Remote Temp. Compensation: No
IP Rating IP43 (electronic components), IP22 (connection area)
Dimensions TR (h x w x d) 216 x 295 x 103 (mm) – Dimensions MC4 (h x w x d) 246 x 295 x 103 (mm)

Weight (Kg) 4.5

5 KVA/48V Must PV1800-VHM Hybrid MPPT Solar Inverter

Rhyl Kiio — Fri, 07 Apr 2023 22:55:50 +0000

5 Kilowatts 48V/80A Must Hybrid MPPT Solar Inverter

5 Kilowatts 48V/80A Must Hybrid MPPT Solar Inverter is a multi-functional inverter/charger. It combines functions of inverter, solar and battery charger to offer an uninterruptible power supply. Its comprehensive LCD display offers user-configurable and easy-accessible button operations such as; battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.

5 Kilowatts 48V/80A Must Hybrid MPPT Solar Inverter Features:

Pure sine wave solar inverter
Output power factor 1
High PV input voltage range
Built-in 80A MPPT solar charger
Battery equalization function to optimize battery performance and extend the lifecycle.
Built-in anti-dusk kit for harsh environment

Click this link to download the datasheet: 2KW-5KW MPPT Hybrid Solar Inverter

DEYE 3KW Single Phase – Hybrid Inverter

Rhyl Kiio — Fri, 07 Apr 2023 22:45:28 +0000

Product Specifications

Model: SUN-3K-SG04LP1-24-EU
Installation Style: Wall-Mounted

Colourful touch LCD, IP65 protection degree
6 time periods for battery charging/discharging
Max. charging/discharging current of 140A
Max.16pcs parallel
DC coupled and AC coupled to retrofit existing solar system
Support storing energy from diesel generator
24/48V low voltage battery, safe and reliable
Unique Smart Load application and Grid peak shaving function
4ms fast transfer from on-grid to off-grid mode, ensuing the traditional fixed frequency air conditioner works well

Technical Specifications

Model	SUN-3K-SG04LP1-24-EU	SUN-3K-SG04LP1-EU	SUN-3.6K-SG04LP1-EU	SUN-5K-SG04LP1-EU	SUN-6K-SG04LP1-EU
Battery Input Data
Battery Type	Lead-acid or Lithium-ion
Battery Voltage Range (V)	20~30	40~60	40~60	40~60	40~60
Max. Charging Current (A)	140A	70A	90A	120A	135A
Max. Discharging Current (A)	140A	70A	90A	120A	135A
Charging Curve	3 Stages / Equalization
External Temperature Sensor	Yes
Charging Strategy for Li-Ion Battery	Self-adaption to BMS

PV String Input Data
Max. DC Input Power (W)	3900W	3900W	4680W	6500W	7800W
PV Input Voltage (V)	370V (125V~500V)
MPPT Range (V)	150~425V
Start-up Voltage (V)	300~425V
PV Input Current (A)	13A		13A+13A
Max. PV ISC (A)	17A		17A+17A
No.of MPPT Trackers	1		2
No.of Strings Per MPPT Tracker	1		1+1

AC Output Data
Rated AC Output and UPS Power (W)	3000W	3600W	5000W	6000W
Max. AC Output Power (W)	3300W	3690W	5500W	6600W
Peak Power (off grid)	2 times of rated power, 10 S
AC Output Rated Current (A)	13.6/13	16.4/15.7	22.7/21.7	27.3/26.1
Max. AC Current (A)	15/14.3	18/17.2	25/23.9	30/28.7
Max. Continuous AC Passthrough (A)	35A			40A
Power Factor	0.8 leading to 0.8 lagging
Output Frequency and Voltage	50/60Hz; 220/230Vac (single phase)
Grid Type	Single Phase
Current Harmonic Distortion	THD<3% (Linear load<1.5%)

Efficiency
Max. Efficiency	97.60%
Euro Efficiency	96.50%
MPPT Efficiency	99.90%

Protection
PV Input Lightning Protection	Integrated
Anti-islanding Protection	Integrated
PV String Input Reverse Polarity Protection	Integrated
Insulation Resistor Detection	Integrated
Residual Current Monitoring Unit	Integrated
Output Over Current Protection	Integrated
Output Shorted Protection	Integrated
Output Over Voltage Protection	Integrated
Surge protection	DC Type II / AC Type Ⅲ

Certifications and Standards
Grid Regulation	CEI 0-21, VDE-AR-N 4105, NRS 097, IEC 62116, IEC 61727, G99, G98, VDE 0126-1-1, RD 1699, C10-11
Safety EMC / Standard	IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2

General Data
Operating Temperature Range (℃)	-40~60℃, >45℃ Derating
Cooling	Natural cooling
Noise (dB)	<30 dB
Communication with BMS	RS485; CAN
Weight (kg)	14
Size (mm)	330W×433H×238D
Protection Degree	IP65
Installation Style	Wall-mounted

2000W Power Inverter

Rhyl Kiio — Fri, 07 Apr 2023 22:35:34 +0000

SolarMax has designed a compact and stylish modified sine wave inverter that operates silently This inverter is ideal for electrical equipment with consumption lower than 2000W with a voltage of 220V such as cellphones, TVs, DVDs, laptops, electric lights, digital cameras, electric fans, electric tools and so on. This inverter packs a PWM CMOS allowing for a smaller and quiet system The inverter comes with spare fuses. just in case the digital protection measures do not kick in on time. with a one-year warranty, you can be assured of a quality product.

Key Features

2000W Continuous Power

Power High Converting Efficiency

Under Voltage Protection

Over Voltage Protection

Short Circuit Protection

Overload Protection

Aluminum Alloy Housing

Genuine 300W/375W/600W Power Inverters

Rhyl Kiio — Fri, 07 Apr 2023 22:16:44 +0000

DESCRIPTION:

These inverters have been designed as compact and stylish with a modified sine wave inverter that operates silently It is ideal for electrical equipment with consumption lower than rated power with a voltage of 220V such as cellphones, TVs, DVDs, laptops, electric lights, digital cameras, electric fans, electric tools and so on. This inverter packs a PWM CMOS allowing for a smaller and quiet system The inverter comes with spare fuses. just in case the digital protection measures do not kick in on time. with a one-year warranty, you can be assured of a quality product.